Shipping worldwide · 3-year warranty on every product
Home  /  Products  /  LumenAir
LumenAir series · Precision air

Stable, accurate air for every lumen you extrude.

LumenAir is the industry standard for high-accuracy airflow to the extrusion die. Each air channel runs from its own digital setpoint, and every unit has precision internal pumps, so there's no external compressor to install or maintain. Plug it into a standard outlet and run.

Extrucore LumenAir LA1C compact wall-mount precision air source with 7-inch touchscreen
No compressorPrecision internal air pumps
7" touchscreenDigital setpoint for each channel
Remote controlExternal inputs from your line
CE listed3-year warranty, ships worldwide
Models

One platform, sized to your line.

Start with a single channel or build out a full rack. Every LumenAir shares the same precise control, so you can add channels as your products change.

LumenAir LA1C compact wall-mount air source
New · LA1C

Compact wall-mount

The same precise air control in a much smaller, wall-mounted design. Ideal where floor and bench space are tight.

  • 7" touchscreen setpoint
  • Remote control inputs
  • Mounts at the line
LA1C data sheet (PDF) →
Two LumenAir LA-2 two-channel air sources on rack shelves
Original series · LA-1 / LA-2

Portable, modular

One or two channels in a portable unit that moves easily between extrusion lines. Add the optional wall shelf to mount it at eye level.

  • 1 or 2 air channels
  • Moves between lines
  • Optional wall shelf
LA-1 & LA-2 data sheet (PDF) →
LumenAir LA-4 four-channel precision air source in an equipment rack
Original series · LA-4

Four channels

Four independently controlled air channels for multi-lumen work. Combine units in the optional mobile cabinet for as many channels as your line needs.

  • 4 independent channels
  • Rack or cabinet mount
  • Built for multi-lumen
LA-4 data sheet (PDF) →
LumenAir Rapid-Step touchscreen showing a taper pressure profile
For taper tubing

Rapid-Step

The LumenAir built for taper and bump tubing. Three preset pressures, switched on cue from your puller, with an adjustable 0.2 to 4 second response.

  • 0 to 45.0" H₂O output
  • 0.1" H₂O resolution
  • 3 preset setpoints
Explore Rapid-Step →
Option · HMI remote panel

Run up to ten LumenAir units from one operator panel.

The optional HMI remote panel puts every channel on one screen at the operator's station.

HMI data sheet →
How it works

Closed-loop air, from setpoint to die.

01

Set the pressure

Enter a digital setpoint for each channel on the touchscreen, or send it from your extrusion control system.

02

Internal pumps supply the air

Precision pumps inside the unit generate the air. No plant air, no compressor, nothing to plumb.

03

Sensors hold it steady

A high-resolution digital pressure sensor and microprocessor control keep each channel locked to its setpoint.

04

Tubing stays in spec

Stable lumen air means consistent inside diameters and wall thickness, run after run.

Where it's used

Made for tubing where a tenth of an inch of water column matters.

LumenAir runs on medical and specialty micro-tubing lines around the world, wherever lumen dimensions have to hold.

01

Medical catheter tubing

Steady lumen air for tight-tolerance catheter work.

02

Multi-lumen tubing

A dedicated, controlled air supply for every lumen.

03

Taper & bump tubing

Rapid-Step shifts pressure on cue with the puller.

04

Research & specialty lines

Precise, repeatable air for development work.

LumenAir questions

Straight answers for engineers.

Does LumenAir need an external air compressor?

No. Every LumenAir system has precision internal air pumps. Plug it into a standard power outlet and it's ready to run, with no plant air or compressor lines to connect.

How is the air pressure set?

Each air channel is controlled by its own digital setpoint. You can enter it on the touchscreen or set it remotely through the standard external control inputs connected from your extruder control system.

Can I run more than one lumen or line?

Yes. LumenAir is modular. Choose one, two or four channel units, combine several in the optional mobile cabinet for as many channels as you need, and add the HMI remote panel to control up to ten units from one screen.

Which LumenAir is right for taper or bump tubing?

Rapid-Step. It holds three preset pressures and switches between them on a signal from your puller, with a response time you can adjust from 0.2 to 4 seconds.

How are LumenAir units calibrated?

Every unit is pressure calibrated on a NIST-calibrated ADT681 test system, and we keep calibration records on file for five years. We also recalibrate units already in the field.

What's the warranty, and do you ship internationally?

All LumenAir systems carry a three-year warranty and are CE listed. We ship worldwide; just tell us the power cord your country needs when you order.

Tell us about your line.

Share the tubing you're running and what you need to hold. We'll recommend a setup and send a quote.

EXTRUCORE
Precision downstream equipment for micro-tubing extrusion. Extrusion Solutions since 1993.
Corporate headquarters 848 N Rainbow Blvd #2492
Las Vegas, NV 89107
California office (correspondence) 68718 E Palm Canyon Drive #301
Cathedral City, CA 92234
© 2026 Extrucore LLC. All rights reserved.